Atlas ▪ Bolaite Air Compressor
20 years of service experience
400-169-8060
150-0028-5604
Contact details
Atlas ▪ Bolaiteair Compressor

Mailbox:bolaite-air@139.com

Whole machine:+86 150-0028-5604

Service:+86 152-2164-0839

400:400-169-8060

Shanghai Headquarters: Building 3, 58 Caoli Road, Fengjing town, Jinshan District, Shanghai

Common faults and treatment methods of air filter of screw air compressor

Time:2019-07-01     Views:795次

The air filter is a consumable in the screw compressor, and it will be blocked or damaged when it is used carelessly. The air filter of the screw air compressor is composed of an air filter assembly and a filter element. The outside is connected with the intake valve of the air compressor through a joint and a threaded tube to filter foreign matter such as dust and particles in the air. Generally speaking, the air filter to be installed can be selected according to the amount of intake air.

Fault performance: The clogging of the filter will consume the energy of the air compressor, waste electricity, and make it easy for dust to enter the unit through the filter element. Excessive dust inside the air compressor will affect the service life of the screw air compressor oil and cause oil and gas separation to block.

Troubleshooting: 1. The filter element is the core component of the filter. It is made of special materials and is a vulnerable part that requires regular maintenance.

2. The longer the filter is used, the more impurities will be cut off, the greater the pressure, the less the flow, and it needs to be cleaned immediately.

3. When cleaning, be careful not to deform or damage the filter element.

The filter paper in the equipment is also one of the most important ones. The high-quality filter paper usually uses fine fiber paper filled with synthetic resin, which can effectively filter impurities and has a strong dirt accumulation capacity. The equipment also has strict requirements on the strength of the filter paper. Due to the large air flow, the strength of the filter paper can resist strong airflow, ensuring filtration efficiency and prolonging the service life of the equipment. The pore size of the filter paper is about 10um, and the dust on the surface is usually removed every 1000 hours. The method of removal is to blow the dust away from the inside out with low pressure air. The air filter of the screw air compressor is equipped with a differential pressure controller. There will be an early warning when clogging occurs. At this time, the air filter needs to be cleaned or replaced.

Copyright ©2020 Atlas Bolaite All rights reserved

Technical support:shangyun case number:ICP No.XXXXXXXX